Push streaming via Adobe Flash Media Live Encoder

Download «Adobe Flash Media Live Encoder», install it and then launch.

You can find RTMP URL and a stream key in your Control Panel. Choose the stream, clock edit and take a look at Push URL.

Then in Adobe Flash Media Live Encoder fill the «FMS URL» field with this part of PUSH URL: rtmp://vp-push.gcdn.co/in

Fill the «Stream» field with key (all the remaining symbols): 9cb3fdee0836564bd0046dasdb0e4de3sda32af712411313

Fill the Device choose the source (device or soft).

You can also configure the other options.

Recommended parameters

Format: H.264

Frame Rate: 30 fps
Input Size: 1280x720
Bit Rate: 2000 Kbps

For Audio:
Device – audio source

Channels: Stereo

Bit Rate: 128 kbps

You can change them if you need to.


Click «Start» to run the stream.

Was this article helpful?
Recently viewed articles