Output parameters after transcoding: bitrate, frame rate, and codecs
What is transcoding with ABR?
In a nutshell, transcoding is converting the original video from one format to another format with a set of extra qualities (ABR). Transcoding aims to make videos viewable across different platforms and devices and to expand the number of viewers, e.g., adding those who couldn't watch the video in its original format. Learn more about transcoding with our in-depth article.
Transcoding with adaptive bitrate streaming (ABR) works like this:
- Decoding of the original video (list of accepted parameters for input video)
- Processing, including scaling (resizing,) frame rate conversion, aspect ratio conversion, and other types of video processing
- Encoding into the desired output format
Discover how we lowered the bitrate for live and VOD streaming by 32.5% without sacrificing quality.
Audio and video codecs
A transcoded video stream has the following codecs by default:
- Audio: AAC, 44.1KHz, stereo
- Video: H264, 30FPS, ABR
Output parameters after transcoding
| Video Quality | Resolution | FPS | Video bitrate, Mbps | Audio bitrate, Mbps |
| UHD 8K* | 7680 × 4320 | - | - | - |
| UHD 4K | 3840 × 2160 | 30 | 14,000 | 0,196 |
| QHD 2K | 2560 × 1440 | 30 | 7,200 | 0,196 |
| Full HD 1080p | 1920 × 1080 | 30 | 4,050 | 0,128 |
| HD 720p | 1280 × 720 | 30 | 1,800 | 0,128 |
| SD 480p | 854 × 480 | 30 | 0,800 | 0,128 |
| 360p | 640 × 360 | 30 | 0,450 | 0,064 |
| 240p* | 427 × 240 | 30 | 0,200 | 0,064 |
| 144p* | 254 × 144 | 30 | 0,072 | 0,064 (1ch) |
*To enable these qualities, contact the support team.
The values in the table are given for videos with a horizontal aspect ratio of 16:9. The values are reversed for vertical videos. For example, if a horizontal resolution is (1280 × 720), the relevant vertical resolution is (720 × 1280).
We use variable bitrate (VBR) for encoding video. The table above shows average values. The control panel shows a sum of audio and video bitrates.
Note: We don’t upscale videos. Your output will range from the lowest quality to that of your original bitrate. So, if you upload a 4K video, your output will range from the lowest quality up to 4K. Similarly, if you upload a 720p video, your output will vary from the lowest quality up to 720p only.
How to apply custom advanced settings
To apply the following custom settings, contact the support team or your manager:
- Use codecs H265 HEVC, VP9, AV1, etc.
- Add 8K quality
- Add super-low quality 144p
- Change preset of output ABR qualities for all or some renditions, remove low-quality renditions
- Use 60+ FPS or use original FPS values
- Increase bitrate for audio; use 48KHz
- Use Dolby Digital, Dolby Atmos
- Transmux and “pass-through” instead of transcoding for live streams
Was this article helpful?
Not a Gcore user yet?
Explore the Streaming Platform by Gcore